Claxon multiton cu cinci tuburi pentru flaut corn 12V universal

Descrierea produsului:
Setul complet include:
o pomp? de aer de 1,12 V
2. Difuzoare mari, medii ?i mici 5 dimensiuni diferite 3. Un
adaptor
4. Furtun care conecteaz? claxonul ?i r?d?cina pompei de aer (t?ia?i la cele cinci sec?iuni corespunz?toare la instalare ).
5. Releu unu-unu
6. Un set de ?uruburi ?i piese de conectare
metoda de instalare:
Conexiune de instalare a releului: 30 la pozitivul bateriei 85 ?i 86 la cei doi conectori originali ai originalului 87 la polul negativ pozitiv al pompei de aer al pompei de aer conectat direct direct a calca.

prompt:
The horn is a 15A pure current horn. The battery current of the original car is 15A, but after the fuse and relay are converted, the current reaches
Once inside the car, it becomes 10A. Note
First test the horn, connect 2 wires to the original car battery. Then connect the positive and negative wires of the wire to the horn, and listen to the sound!!
The horn doesn't sound and there is no sound. Please note!
Replace the fuse of the original car. [The fuse of the original car horn is 10A. It is recommended that the buyer change to 20A insurance. Protects car electricity
Problem with the road]
Replace the horn of the original car and install our horn. If the sound is not loud. See if the positive and negative terminals are connected correctly, if not
OK ... just connect 2 wires to the battery, and then connect the relay to the wires. This protects the horn.
Then connect the speaker on the line of the relay, pay attention to the positive and negative poles.